METHODS & EQUIPMENT ASSOCIATES Distributor of Metal Cutting Machinery since 1962
Home
Drilling
Milling
Turning
Grinding
Special Machines
Service and Parts
Contact M&E
News and Press
The Ultimate Turning Machines
Specifications
Alpha 1350XS
Alpha 1400XS
Alpha 1460XS
Alpha 1550XS
Alpha 1800XS-120
Alpha 1800XS-170
Alpha 1550XM
Distance between centers
650mm (25”)
1250mm (50”)
1500mm (60”)
2000mm (80”) or 3000mm (120”)
2000mm (80”), 3000mm (120”) or 4000mm (160”)
Saddle stroke Z-Axis Max
556mm (217/8”)
1156mm (451/2”)
1510mm (60”)
2010mm (791/8”)
3020mm (1187/8”)
Swing over bed
350mm (133/4”)
400mm (153/4”)
460mm (183/8”)
554mm (213/4”)
800mm (311/2”)
Swing in gap
535mm (21”)
585mm (23”)
730mm (283/4”)
830mm (325/8”)
870mm (341/4”)
Gap width from faceplate
165mm (61/2”)
216mm (81/2”)
340mm (133/8”)
Swing over cross-slide
196mm (73/4”)
246mm (95/8”)
270mm (105/8”)
370mm (141/2”)
520mm (201/2”)
Spindle bore
42mm (15/8”)
55mm (21/8”)
78mm (31/16”)
104mm (41/8”)
120mm (43/4”)
170mm (63/4”)
Spindle nose
Camlock D1-4”
Camlock D1-6”
Camlock D1-8”
Camlock D1-11”
A2-11”
Taper in nose bush
No. 3 MT
No. 4 MT
No. 5 MT
N/A
Low range
1 to 366rpm
1 to 297rpm
1 to 247rpm
1 to 224rpm
15 to 611rpm
10 to 407rpm
Medium range
1 to 1088rpm
1 to 861rpm
1 to 740rpm
1 to 672rpm
High range
1 to 3500rpm
1 to 2700rpm
1 to 2200rpm
1 to 2000rpm
40 to 1500rpm
25 to 1000rpm
Main motor
7.5kW (10HP)
11kW (15HP)
26kW (35HP)
Constant power range
86-3500rpm
69-2700rpm
67-2200rpm
64-1970rpm
153-1500rpm
102-1000rpm
Tailstock quill travel
140mm (53/4”)
140mm (51/2”)
145mm (55/8”)
210mm (81/4”)
Tailstock quill diameter
63mm (21/2”)
73mm (27/8”)
95mm (33/4”)
Tailstock taper
No. 6 MT
Electrical supply required
22kVA
24kVA
32kVA
Floor to spindle centre
1061mm (41”)
1086mm (42”)
1145mm (443/4”)
1195mm (463/4”)
1200mm (48”)
1200mm (471/4”)
Overall length
2400mm (743/4”)
2900mm (101”)
2000mm (80”) 4100mm (166”)
2000mm (80”) 4210mm (166”)
Illustrations and specifications are not binding in detail. The designs are subject to modification and improvement without notice.
Workpiece capacity and machinable lengths and diameters will vary and may be reduced below maximum depending on workholding and tooling used.
Not all the features described in the brochure are relevant to all machines in the range.
Motor max torque
4Nm
Output max torque
152Nm
Max output speed
105rpm
Resolution
0.001°
Back to Top
